Created on 06/12/2015
c
2015 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 1 of 2
MODEL
FLDA
Filter
SERIES 1 / CAPACITY: 40 L/min. / CAVITY: T-13A
Sun filter elements are available as Surface Type (Last Chance) and Depth Style elements. The flow path is Port 2
to Port 1 and should not be used in reverse, even with a reverse free flow check valve installed. The elements have
a high collapse pressure and are intended to be used in line with the system. Filter life will depend on initial system
cleanliness and the amount of dirt ingression to the system when operating.
TECHNICAL DATA
Maximum Operating Pressure 350 bar
Seal kit - Cartridge Buna: 990-010-007
Seal kit - Cartridge Polyurethane: 990-010-002
Seal kit - Cartridge Viton: 990-010-006
(X)CONTROL
X Not Adjustable
(D)FILTER RATING
D 40 Micron Nominal
(N)SEAL MATERIAL
N Buna-N
V Viton
MATERIAL/COATING
Standard Material/Coating
/AP Stainless Steel, Passivated
/LH Mild Steel, Zinc-Nickel
snhy.com/
FLDA
TECHNICAL FEATURES
Differential crush pressure is 3000 psid (210 bar).
The flow path is Port 2 to Port 1 only.
Installation directly above the subplate will protect the entire valve stack from particles.
Surface type element features a 304 stainless steel mesh media. All internal components are 304 stainless steel.
Surface Type elements have a 40 micron nominal rating (63 micron absolute).
Surface Type elements are designed to capture errant particles that may not be trapped in the main system filter or particles resulting from a component failure.
With a correctly assembled system, Surface Type elements will be unnoticed during regular operation, but will provide protection from sudden component failure.
Surface Type (Last Chance) elements have a single layer stainless steel mesh supported by perforated sheet tube.
PERFORMANCE CURVES
See Related Accessories for replacement elements.
NOTES
Model Code Example: FLDAXDNCONFIGURATION OPTIONS
